New energy Bearing Manufacturing Co., Ltd

Self Aligning Ball Bearings

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.

A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.

Toyana 1206 self aligning ball bearings: d : 110 mm; D : 160 mm

25 mm x 62 mm x 16 mm ISB 1206 KTN9+H206 self aligning ball bearings: d : 210 mm; D : 380 mm

95 mm x 200 mm x 45 mm NSK 1319 self aligning ball bearings: d : 90 mm; D : 140 mm

17 mm x 47 mm x 19 mm SKF 2303E-2RS1TN9 self aligning ball bearings: Cone Part Number : EE390090; Design Units : Imperial

100 mm x 180 mm x 46 mm ISO 2220K self aligning ball bearings: d : 90 mm; D : 210 mm

40,000 mm x 90,000 mm x 33,000 mm SNR 2308K self aligning ball bearings: d : 20 mm; D : 70 mm

30 mm x 72 mm x 19 mm NTN 1306S self aligning ball bearings: Series : M241500; Cone Part Number : M241545

50 mm x 90 mm x 23 mm ISB 2210-2RSTN9 self aligning ball bearings: d : 160 mm; D : 295 mm

15,000 mm x 42,000 mm x 13,000 mm SNR 1302G14 self aligning ball bearings: d : 160 mm; D : 295 mm

Toyana 1307K self aligning ball bearings: d : 160 mm; D : 295 mm

105 mm x 190 mm x 50 mm NTN 2221S self aligning ball bearings: d : 160 mm; D : 295 mm

15 mm x 42 mm x 17 mm ISO 2302 self aligning ball bearings: d : 80 mm; D : 165 mm

◂ Previous page Next page ▸

All Products Contact Now